KEKS-LIGHT METER
The Whole New Generation Light Meter
The 2021 KEKS Light-meter received a facelift, with enhanced accuracy and build quality improved. The new KEKS light-meter arrives with a flat glass front sensor cover design, giving a minimal appearance. The new model has also redesigned the light-meter body, with improved control buttons fitment and click feeling.
KEKS Light-meter is a whole new generation light meter. The bright and informative OLED display allows you to read the index in every condition, the aluminium crafted design delivers the best quality and design. Long battery life allows you to continuously metering for over 20 hours.
OLED DISPLAY
0.91" OLED display
The OLED display shows the Shutter speed, Aperture, ISO, EV, and LUX reading. There are also two selectable metering mode, the aperture priority mode and shutter speed priority mode. The display will automatically adjust the brightness in different environments, no matters under the direct sunlight or dark environment, the display is still clearly be seen.
There’s a battery status indicator as well, which flashes when the battery is low and stops flashing when the meter is fully charged.
The OLED display shows the Shutter speed, Aperture, ISO, EV, and LUX reading. There are also two selectable metering mode, the aperture priority mode and shutter speed priority mode. The display will automatically adjust the brightness in different environments, no matters under the direct sunlight or dark environment, the display is still clearly be seen.
There’s a battery status indicator as well, which flashes when the battery is low and stops flashing when the meter is fully charged.
PERFORMANCE
VISHAY VEML7700
VEML7700 is a high accuracy ambient light digital 16 bit resolution sensor. Compare with the traditional analog sensor, KEKS light-meter gives higher accuracy and better reliability. 30º metering angle of view strikes a good balance between average and selective metering.
VEML7700 is a high accuracy ambient light digital 16 bit resolution sensor. Compare with the traditional analog sensor, KEKS light-meter gives higher accuracy and better reliability. 30º metering angle of view strikes a good balance between average and selective metering.
Technical Data
Compare to traditional Light-meter, we have a wide range of Shutter Speed, Aperture and ISO setting. Which allows you to rely on it at dark or low light condition.
Aperture Range – F/1.0 to F/64; 1/3 stop increments
Shutter Speed Range – 30 seconds to 1/6400 of a second; 1/3 stop increments
ISO Range – 50 to 8000; 1/3 stop increments
Aperture Range – F/1.0 to F/64; 1/3 stop increments
Shutter Speed Range – 30 seconds to 1/6400 of a second; 1/3 stop increments
ISO Range – 50 to 8000; 1/3 stop increments
Battery
KEKS Light-meter uses rechargable built-in 220mAh battery, over 20 hours battery life under continuous metering. EM-01 use Type C fast charging port, allows you to use any type c charging cable to charge it in everywhere.
APPLICABLE TO ALL CAMERAS
No matters what kind of camera you are using, TLR, SLR, RANGEFINDER or MEDIUM FORMAT CAMERA. Any camera with a hot/cold shoe is applicable to KEKS light-meter. In addition, it’s adjustable. By unscrewing the mount we’re able to attach larger or smaller mounts , as well as position the mount in the center or to the side of the bottom of the meter(3 positions) KEKS light-meter is a independent device with built in chargeable battery.
You can now upgrade to aluminium shoe mount option, three different sizes in a set, also one extra set of plastic shoe mount will be included.
BUILD QUALITY
KEKS light-meter is using aluminium body design, including the case, bottom plate and buttons. We are using 904L steel bolts to connect the bottom plate and the meter body. Makes the KEKS meter is more Solid and Pratical.
MINIMALIST DESIGN
On the Aluminium top plate, 4 buttons to control the APERTURE and SHUTTER SPEED. To set the ISO, hold the metering button (the one on the back of the unit next to the screen) and then press either up or down on the aperture adjustment. Once you’ve selected the right ISO, you’re ready to meter. And with the help of the OLED display, makes the KEKS light-meter is Easy and Simple to use.
SPECIFICATIONS
- Construction – Aluminum body, steel screws, Aluminium shoe mount
- Metering – 30º average metering (reflected light)
- Mode - Aperture-priority or Shutter-priority
- Aperture Range – F/1.0 to F/64; 1/3 stop increments
- Shutter Speed Range – 30 seconds to 1/6400 of a second; 1/3 stop increments
- ISO Range – 50 to 8000; 1/3 stop increments
- Display – 0.91″ OLED
- Battery – Rechargable 220mAh
- Battery Life Per Charge – 20 hours continuous metering
- Charging – 5V/450mA via USB-C
- Mount – Plastic/ Aluminium* (option) Shoe mount, adjustable to size and position (3 sizes Shoe mount)
- Inside The Box – Light-meter, One Plastic shoe mount set, Type C Charger, Instuction Manual
See this model in real-life customer photos:
REVIEW
KEKS KM02 Light Meter
$112.00
**OUT OF STOCK**
ESTIMATED SHIPPING DATE: EARLY APRIL
-
Introducing the all new KM02 OLED light-meter, which inherits all the simplicity of its predecessor the EM01, yet includes ground-breaking new features, compact dimensions and outstanding performance. All in all, making your photography experience easier and more enjoyable than ever before.
-
https://www.kekscameras.com/kekskm02.html#/